Stainless Steel Attachment Chain for Valve Tags

This 150mm stainless steel ball chain provides a practical way to attach valve tags, identification discs and other compatible labels. The connector is already fitted to one end of the chain, so only the loose end needs to be inserted to form a loop around pipework, handles or suitable fixing points.

The stainless steel construction provides greater corrosion resistance than a standard tin ball chain, making it suitable for many plant rooms, workplaces and general identification applications.

Product Specifications

• Chain length: Approximately 150mm
• Ball diameter: Approximately 3mm
• Material: Stainless steel
• Connector: Included and pre-attached to one end
• Typical uses: Valve tags, equipment tags and identification discs
• Minimum order: 10 chains

Attaching the Chain

Pass the loose end of the chain through the hole in the tag and around the required fixing point. Insert the loose end into the connector already attached to the opposite end to complete the loop.

Please check that the hole in your tag is large enough to accept the approximately 3mm ball chain before ordering. This product is intended for attaching identification tags and is not designed for lifting, load-bearing or safety-critical applications.

For other attachment options, browse our key rings, ball chains and tag accessories. A lower-cost 150mm tin ball chain is also available for less demanding environments.